Reliability-based design optimization of V-belt drives using inverse reliability analysis and monte carlo simulation
Tóm tắt: 224
| 
PDF: 189 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
V-belt drive
Reliability-based design optimization
Inverse reliability analysis
Monte Carlo simulation
Tóm tắt
V-belt drives are widely used in industrial and agricultural machinery, yet conventional deterministic design often ignores uncertainties in materials, operating conditions, and tolerances. This study proposes a Reliability-Based Design Optimization (RBDO) framework for V-belt drives, integrating Inverse Reliability Analysis with a Genetic Algorithm and validated by Monte Carlo Simulation. Design variables include driver and driven pulley diameters, belt length, and number of belts, with objectives of minimizing mass and maximizing transmitted power under a reliability target of R* = 99.9%. Results indicate that RBDO reduces system mass by 18.2% and increases power from 4.75 kW to 5.65 kW compared to deterministic optimization, while ensuring reliability. The proposed framework provides a practical tool for lightweight, reliable, and high-performance V-belt drive design.
Tài liệu tham khảo
-
[1] N. H. Loc, Fundamental of Machine Design. Ho Chi Minh City, Vietnam: National University Publisher, 2016 (in Vietnamese).
[2] R. G. Budynas and J. K. Nisbett, Shigley’s Mechanical Engineering Design, vol. 9. New York, NY, USA: McGraw-Hill, 2011.
[3] H. L. Nguyen, Reliability-Based Design and Analysis of Mechanical Systems. Ho Chi Minh City, Vietnam: National University Publisher, 2015.
[4] N. A. Raji, A. A. Erameh, A. A. Yussouff, and R. O. Durojaye, “Response surface methodology approach for transmission optimization of V-belt drive,” Modern Mechanical Engineering, vol. 6, pp. 32–43, 2016.
[5] P. Gao and L. Xie, “Reliability models of belt drive systems under slipping failure mode,” Advances in Mechanical Engineering, vol. 9, Art. no. 1687814016687195, 2017.
[6] D. Padmanabhan, H. Agarwal, J. E. Renaud, and S. M. Batill, “A study using Monte Carlo simulation for failure probability calculation in reliability-based optimization,” Optimization and Engineering, vol. 7, pp. 297–316, 2006.
[7] V. V. Rengaraj, “Design optimisation of auxiliary belt-drives in heavy-duty vehicle engines using HEEDS MDO,” Degree Project, KTH Royal Institute of Technology, Stockholm, Sweden, 2024. [Online]. Available: https://kth.diva-portal.org/smash/record.jsf?pid=diva2:1939649.
[8] G. Zhai, Z. Liang, and M. Li, “Study on the optimization model of a flexible transmission,” Mathematical Problems in Engineering, vol. 2019, Art. no. 5084573, 2019.
[9] Y. Yuan, X. Song, W. Sun, and X. Wang, “Multidisciplinary design optimization of the belt drive system considering both structure and vibration characteristics based on improved genetic algorithm,” AIP Advances, vol. 8, 2018.
[10] Y. Chen, X. Huang, M. Ma, J. Luo, and B. Ding, “Reliability-based design optimization of key components in a gantry machining center,” Probabilistic Engineering Mechanics, vol. 81, Art. no. 103786, 2025.
[11] Y.-Z. Ma, X.-X. Jin, X.-L. Wu, C. Xu, H.-S. Li, and Z.-Z. Zhao, “Reliability-based design optimization using adaptive Kriging: a single-loop strategy and a double-loop one,” Reliability Engineering & System Safety, vol. 237, Art. no. 109386, 2023.
[12] Z. Yao, J. Hao, C. Li, Z. Jiang, and J. Zhao, “Reliability-based design optimization of fluid-conveying pipeline structure subjected to in-service loadings,” Reliability Engineering & System Safety, vol. 256, Art. no. 110741, 2025.
[13] J. Zhao, X. Gong, Z. Yao, C. Zhao, M. Xu, G. Shi, et al., “Reliability-based design optimization of key components in the ball screw feed system,” Mechanism and Machine Theory, vol. 214, Art. no. 106151, 2025.
[14] N. H. Loc, T. Van Thuy, and P. Q. Trung, “Reliability-based analysis of machine structures using second-order reliability method,” Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 13, no. 3, Art. no. JAMDSM0063, 2019.
[15] Z. Zhang, C. Jiang, G. Wang, and X. Han, “First- and second-order approximate reliability analysis methods using evidence theory,” Reliability Engineering & System Safety, vol. 137, pp. 40–49, 2015.
[16] X. Liu, S.-H. Jiang, J. Xie, and X. Li, “Bayesian inverse analysis with field observation for slope failure mechanism and reliability assessment under rainfall accounting for nonstationary characteristics of soil properties,” Soils and Foundations, vol. 65, Art. no. 101568, 2025.
[17] F. S. Lobato, F. A. Lara-Molina, and G. B. Libotte, “A comparative study of direct and inverse reliability methods applied to robotic manipulators design,” in Reliability Assessment and Optimization of Complex Systems. Elsevier, 2025, pp. 1–21.
[18] F. S. Lobato, M. S. Gonçalves, B. Jahn, A. A. Cavalini Jr., and V. Steffen Jr., “Reliability-based optimization using differential evolution and inverse reliability analysis for engineering system design,” Journal of Optimization Theory and Applications, vol. 174, pp. 894–926, 2017.
[19] I. M. Sobol, “Sensitivity estimates for nonlinear mathematical models,” Mathematical Modelling and Computational Experiments, vol. 1, p. 407, 1993.
[20] A. Saltelli, P. Annoni, I. Azzini, F. Campolongo, M. Ratto, and S. Tarantola, “Variance-based sensitivity analysis of model output: design and estimator for the total sensitivity index,” Computer Physics Communications, vol. 181, pp. 259–270, 2010.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Dec 31, 2025
Download
Cách trích dẫn
Thuy, T. V. “Reliability-Based Design Optimization of V-Belt Drives Using Inverse Reliability Analysis and Monte Carlo Simulation”. Tạp Chí Khoa học Và Công nghệ Đại học Đà Nẵng, vol 23, số p.h 12, Tháng Chạp 2025, tr 45-53, doi:10.31130/ud-jst.2025.23(12).460E.
