Capsule-like smart aggregate-based concrete stress monitoring via impedance signals: numerical study
Tóm tắt: 51
| 
PDF: 27 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Smart aggregate
capsule-like
PZT sensor
impedance-based
compressive stress
Tóm tắt
This study numerically explores the feasibility of a capsule-like smart aggregate (CSA) for monitoring stress in concrete using an impedance-based approach. After a brief introduction to the core principles of impedance-based structural health monitoring (SHM), a finite element model of a concrete cylinder embedded with a CSA sensor is developed. Impedance responses are analyzed under varying levels of axial compressive stress. Variations in the CSA’s impedance response due to applied stresses are analyzed through shifts in the frequency and amplitude of resonant peaks and quantified using the Root Mean Square Deviation (RMSD) index. The results demonstrate that the CSA sensor exhibits clear sensitivity to compressive stress changes, confirming its feasibility for stress monitoring in concrete structures.
Tài liệu tham khảo
-
[1] N. Delatte, Failure, distress and repair of concrete structures. Elsevier, 2009.
[2] M. Alexander, and H. Beushausen, "Durability, service life prediction, and modelling for reinforced concrete structures - review and critique", Cement and Concrete Research, vol. 122, pp. 17-29, 2019.
[3] S. Taheri, "A review on five key sensors for monitoring of concrete structures", Construction and Building Materials, vol. 204, pp. 492-509, 2019.
[4] R. Rodrigues, S. Gaboreau, J. Gance, I. Ignatiadis, and S Betelu, "Reinforced concrete structures: A review of corrosion mechanisms and advances in electrical methods for corrosion monitoring", Construction and Building Materials, vol. 269, 121240, 2021.
[5] P.C. Chang, A. Flatau, and S.C. Liu, "Review paper: health monitoring of civil infrastructure", Structural Health Monitoring, vol. 2, no. 3, pp. 257-267, 2016.
[6] W. Fan, and P. Qiao, "Vibration-based damage identification methods: a review and comparative study", Structural Health Monitoring, vol. 10, no. 1, pp. 83-111, 2010.
[7] E.P. Carden, and P. Fanning, "Vibration based condition monitoring: a review", Structural Health Monitoring, vol. 3, no. 4, pp. 355-377, 2016.
[8] G. Park, H. Sohn, C.R. Farrar, and D.J. Inman, "Overview of piezoelectric impedance-based health monitoring and path forward", Shock and Vibration Digest, vol. 35, no. 6, pp. 451-463, 2003.
[9] V.G.M. Annamdas, and M.A. Radhika, "Electromechanical impedance of piezoelectric transducers for monitoring metallic and non-metallic structures: A review of wired, wireless and energy-harvesting methods", Journal of Intelligent Material Systems and Structures, vol. 24, no. 9, pp. 1021-1042, 2013.
[10] W. S. Na, and J. Baek, "A review of the piezoelectric electromechanical impedance based structural health monitoring technique for engineering structures", Sensors, vol. 18, no. 5, 1307, 2018.
[11] Y. Chen, and X. Xue, "Advances in the structural health monitoring of bridges using piezoelectric transducers", Sensors, vol. 18, no. 12, 4312, 2018.
[12] X. Fan, J. Li, and H. Hao, "Review of piezoelectric impedance based structural health monitoring: Physics-based and data-driven methods", Advances in Structural Engineering, vol. 24, no. 16, pp. 3609-3626, 2021.
[13] C. Liang, F.P. Sun, and C.A. Rogers, "Coupled electro-mechanical analysis of adaptive material systems-determination of the actuator power consumption and system energy transfer", Journal of Intelligent Material Systems and Structures, vol. 5, no. 1, pp. 12-20, 1994.
[14] F.P. Sun, Z. Chaudhry, C. Liang, and C.A. Rogers, "Truss structure integrity identification using PZT sensor-actuator", Journal of Intelligent Material Systems and Structures, vol. 6, no. 1, pp. 134-139, 1995.
[15] G. Park, H.H. Cudney, and D.J. Inman, "Impedance-based health monitoring of civil structural components", Journal of Infrastructure Systems, vol. 6, no. 4, pp. 153-160, 2000.
[16] V. Giurgiutiu, A. Reynolds, and C.A. Rogers, "Experimental investigation of E/M impedance health monitoring for spot-welded structural joints", Journal of Intelligent Material Systems and Structures, vol. 10, no. 10, pp. 802-812, 1999.
[17] S. Bhalla, A.S.K. Naidu, C.W. Ong, C.K. Soh, "Practical issues in the implementation of electromechanical impedance technique for NDE", in Smart structures, devices, and systems, SPIE, vol. 4935, pp. 484-494, 2002.
[18] Z. Chaudhry, F. Lalande, A. Ganino, C. Rogers, and J. Chung, "Monitoring the integrity of composite patch structural repair via piezoelectric actuators/sensors", in Proc. 36th Structures, Structural Dynamics and Materials Conference, USA, 1995.
[19] G. Park, H. H. Cudney, and D. J. Inman, "Feasibility of using impedance-based damage assessment for pipeline structures", Earthquake Engineering & Structural Dynamics, vol. 30, no. 10, pp. 1463-1474, 2001.
[20] H. Zhu, H. Luo, D. Ai, and C. Wang, "Mechanical impedance-based technique for steel structural corrosion damage detection", Measurement, vol. 88, pp. 353-359, 2016.
[21] N. Kaur, S. Goyal, K. Anand, and G. K. Sahu, "A cost-effective approach for assessment of pre-stressing force in bridges using piezoelectric transducers", Measurement, vol. 168, 108324, 2021.
[22] C. K. Soh, K. K. H. Tseng, S. Bhalla, and A. Gupta, "Performance of smart piezoceramic patches in health monitoring of a RC bridge", Smart Materials and Structures, vol. 9, no. 4, pp. 533-542, 2000.
[23] S. Park, S. Ahmad, C. B. Yun, and Y. Roh, "Multiple crack detection of concrete structures using impedance-based structural health monitoring techniques", Experimental Mechanics, vol. 46, no. 5, pp. 609-618, 2006.
[24] D. Ai, H. Luo, and H. Zhu, "Numerical and experimental investigation of flexural performance on pre-stressed concrete structures using electromechanical admittance", Mechanical Systems and Signal Processing, vol. 128, pp. 244-265, 2019.
[25] T. C. Huynh, and J. T. Kim, "Quantitative damage identification in tendon anchorage via PZT interface based impedance monitoring technique", Smart Structures and Systems, vol. 20, no. 2, pp. 181-195, 2017.
[26] N. L. Dang, Q. Q . Pham, and J. T. Kim, "Piezoelectric‐based hoop‐type interface for impedance monitoring of local strand breakage in prestressed multi‐strand anchorage", Structural Control and Health Monitoring, vol. 28, no. 1, e2649, 2020.
[27] H. Gu, G. Song, H. Dhonde, Y. L. Mo, and S. Yan, "Concrete early-age strength monitoring using embedded piezoelectric transducers", Smart Materials and Structures, vol. 15, no. 6, pp. 1837-1845, 2006.
[28] Q. Kong, S. Fan, X. Bai, Y. L. Mo, and G. Song, "A novel embeddable spherical smart aggregate for structural health monitoring: part I. Fabrication and electrical characterization", Smart Materials and Structures, vol. 26, no. 9, 095050, 2017.
[29] D. Wang, H. Song, and H. Zhu, "Embedded 3D electromechanical impedance model for strength monitoring of concrete using a PZT transducer", Smart Materials and Structures, vol. 23, no. 11, 115019, 2014.
[30] Q.Q. Pham, Q.B. Ta, and J.T. Kim, "Capsule-like smart aggregate with pre-determined frequency range for impedance-based stress monitoring", Sensors, vol. 23, no. 1, 434, 2022.
[31] S. Zhao, S. Fan, J. Yang, and S. Kitipornchai, "Numerical and experimental investigation of electro-mechanical impedance based concrete quantitative damage assessment", Smart Materials and Structures, vol. 29, no. 5, 055025, 2020.
[32] T. C. Huynh, N. L. Dang, and J. T. Kim, “Preload monitoring in bolted connection using piezoelectric-based smart interface”, Sensors, vol. 18, no. 9, 2766, 2018.
[33] K. D. Nguyen, and J. T. Kim, "Smart PZT-interface for wireless impedance-based prestress-loss monitoring in tendon-anchorage connection", Smart Structures and Systems, vol. 9, no. 6, pp. 489-504, 2012.
[34] N. L. Dang, Q. Q. Pham, and J. T. Kim, "Hybrid vibration-impedance monitoring in prestressed concrete structure with local strand breakage", Smart Structures and Systems, vol. 30, no. 5, pp. 463-477, 2022.
[35] Q. B. Ta, Q. Q. Pham, N. L. Pham, and J. T. Kim, "Integrating the Capsule-like Smart Aggregate-Based EMI Technique with Deep Learning for Stress Assessment in Concrete", Sensors, vol. 24, no. 14, 2024, 4738.
[36] T. T. Nguyen, J. T. Kim, Q. B. Ta, D. D. Ho, T. T. V. Phan, and T. C. Huynh, "Deep learning-based functional assessment of piezoelectric-based smart interface under various degradations", Smart Structures and Systems, vol. 28, no. 1, pp. 69-87, 2021.
[37] C. Liang, F. Sun, and C. A. Rogers, "Electro-mechanical impedance modeling of active material systems", Smart Materials and Structures, vol. 5, no. 2, pp. 171-186, 1996.
[38] V. Raju, "Implementing impedance-based health monitoring technique", Master's Thesis, Virginia Polytechnic Institute State University, Blacksburg, VA, 1998.
[39] A.N. Zagrai, and V. Giurgiutiu, "Electro-mechanical impedance method for crack detection in thin plates”, Journal of Intelligent Material Systems Structures, vol. 12, no. 10, pp. 709-718, 2001.
[40] T. C. Huynh, T. D. Nguyen, D. D. Ho, N. L. Dang, and J. T. Kim, "Sensor fault diagnosis for impedance monitoring using a piezoelectric-based smart interface technique”, Sensors, vol. 20, no. 2, 510, 2020.
[41] D. Ai, C. Lin, and H. Zhu, "Embedded piezoelectric transducers based early-age hydration monitoring of cement concrete added with accelerator/retarder admixtures", Journal of Intelligent Material Systems and Structures, vol. 32, no. 8, pp. 847-866, 2021.
[42] P. D. Simão, H. Barros, C. C. Ferreira, and T. Marques, "Closed-form moment-curvature relations for reinforced concrete cross sections under bending moment and axial force", Engineering Structures, vol. 129, pp. 67-80, 2016.
[43] H. L. Minh, S. Khatir, M. A. Wahab, and T. Cuong-Le, "A concrete damage plasticity model for predicting the effects of compressive high-strength concrete under static and dynamic loads", Journal of Building Engineering, vol. 44, 103239, 2021.
[44] N. L. Dang, T. C. Huynh, and J. T. Kim, "Local strand-breakage detection in multi-strand anchorage system using an impedance-based stress monitoring method-feasibility study", Sensors, vol. 19, no. 5, 1054, 2019.
[45] Y. Yang, Y. Hu, and Y. Lu, "Sensitivity of PZT impedance sensors for damage detection of concrete structures", Sensors, vol. 8, no.1, pp. 327-346, 2008.
[46] T. C. Huynh, N. L. Dang, and J. T. Kim, "PCA-based filtering of temperature effect on impedance monitoring in prestressed tendon anchorage", Smart Structures and Systems, vol. 22, no. 1, pp. 57-70, 2018.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Oct 31, 2025
Download
Cách trích dẫn
Quang, P. Q., H. T. Canh, và D. N. Loi. “Capsule-Like Smart Aggregate-Based Concrete Stress Monitoring via Impedance Signals: Numerical Study”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 23, số p.h 10C, Tháng Mười 2025, tr 47-52, doi:10.31130/ud-jst.2025.23(10C).663E.
