Study on the application of U-shape anti-roll tank for a water hyacinth processing machine
Tóm tắt: 17
| 
PDF: 18 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Ship stabilization
anti-roll tank
water-hyacinth process machine
roll motion
U-tube anti-roll tank
Tóm tắt
This study focuses on developing a stabilization system suitable for the actual operating conditions of a water hyacinth shredding machine on inland rivers and canals, with the aim of maintaining roll stability throughout operation. The paper proposes the application of a U-shaped anti-roll tank, or U-tank, to the water hyacinth shredding machine. Based on a survey of the vessel’s operating conditions, a two-degree-of-freedom mathematical model was developed to describe the interaction between the vessel’s roll motion and liquid oscillation inside the U-tank. In addition, several stabilization methods were reviewed and compared to support the selection of the U-shaped balancing tank as a suitable solution. Simulation results show that the balancing tank significantly reduces the roll response: the frequency response function decreases from 6.3 rad/rad without the tank to 2.3 rad/rad when active control is applied with G=8×10^3 Nm·s/rad. These results confirm the feasibility of the balancing tank and provide a basis for subsequent experimental studies.
Tài liệu tham khảo
-
[1] N. T. Tien, Research, Design, and Manufacture of an Integrated System for Water Hyacinth Collection, Pretreatment, and Removal from Canals and Waterways in Long An and Neighboring Provinces, research project report, State-Level Science and Technology Project, Ho Chi Minh City University of Technology, Vietnam National University Ho Chi Minh City, Ho Chi Minh City, Vietnam, No. ĐTĐL.CN-26/21, 2024.
[2] Ministry of Transport of Vietnam, National Technical Regulation on Rules for Classification and Construction of Inland Waterway Vessels, QCVN 72:2013/BGTVT, Vietnam, 2013.
[3] E. C. Tupper, Introduction to Naval Architecture, 5th ed. Oxford, U.K.: Butterworth-Heinemann, 2013.
[4] E. V. Lewis, Ed., Principles of Naval Architecture, 2nd rev. ed., vol. III, Motions in Waves and Controllability. Jersey City, NJ, USA: Society of Naval Architects and Marine Engineers, 1989.
[5] N. N. Hong, “Design documentation for the MPLB-01 water hyacinth shredding machine,” Nguyen Hong Barge Building One Member Co., Ltd., Tay Ninh, Vietnam, 2023.
[6] P. Watts, “On a method of reducing the rolling of ships at sea,” Transactions of the Institution of Naval Architects, vol. 24, pp. 165–190, 1883.
[7] S. Bennett, “Ship stabilization: History,” in Concise Encyclopedia of Traffic and Transportation Systems, M. Papageorgiou, Ed. New York, NY, USA: Pergamon Press, 1991, pp. 454–459.
[8] J. F. Allan, “The stabilization of ships by activated fins,” Transactions of the Royal Institution of Naval Architects, vol. 87, pp. 123–159, 1945.
[9] W. Froude, “On the rolling of ships,” Transactions of the Institution of Naval Architects, vol. 2, 1861.
[10] Y. Ikeda and T. Yoshiyama, “A study on flume-type anti-rolling tank,” Journal of the Kansai Society of Naval Architects, no. 216, pp. 111–119, 1991.
[11] B. S. Lee and D. Vassalos, “An investigation into the stabilisation effects of anti-roll tanks with flow obstructions,” International Shipbuilding Progress, vol. 43, no. 433, pp. 70–88, 1996.
[12] H. H. Frahm, “Results of trials of the anti-rolling tanks at sea,” Journal of the American Society for Naval Engineers, vol. 23, no. 2, pp. 571–597, 1911.
[13] G. J. Goodrich, “Development and design of passive roll stabilisers,” Transactions of the Royal Institution of Naval Architects, vol. 111, pp. 81–95, 1969.
[14] K. Kagawa, H. Koukawa, K. Fujita, Y. Zensho, and M. Matsuo, “Development of tuned liquid damper for ship vibration,” Transactions of the West-Japan Society of Naval Architects, no. 78, pp. 251–258, 1989.
[15] K. L. Shyu and H. C. Kuo, “Dynamic behaviour of a U-type tuned liquid damper,” International Shipbuilding Progress, vol. 43, no. 436, pp. 331–345, 1996.
[16] K. S. Youssef, S. A. Ragab, A. H. Nayfeh, and D. T. Mook, “Design of passive anti-roll tanks for roll stabilization in the nonlinear range,” Ocean Engineering, vol. 29, no. 2, pp. 177–192, 2002.
[17] J. Shaik, T. K. Uchida, and C. P. Vyasarayani, “Nonlinear dynamics near a double Hopf bifurcation for a ship model with time-delay control,” Nonlinear Dynamics, vol. 111, no. 23, pp. 21441–21460, 2023.
[18] R. Subramanian, P. V. Jyothish, and V. A. Subramanian, “Genetic algorithm-based design optimization of a passive anti-roll tank in a sea-going vessel,” Ocean Engineering, vol. 203, Art. no. 107216, 2020.
[19] G. Kapsenberg and N. Carette, “A consistent method to design and evaluate the performance of anti-roll tanks for ships,” Ship Technology Research, vol. 70, no. 2, pp. 117–145, 2023.
[20] C. Chen, Y.D. Liu, W. Zhang, Y.P. He, and Y.Y. Tang, “Free roll decay simulation of a polar research vessel with an anti-roll tank based on CFD,” Ocean Engineering, vol. 285, pt. 2, Art. no. 115429, 2023.
[21] W. Wawrzynski, “Ship rolling equation: Comparison of the different damping models,” Ocean Engineering, vol. 280, Art. no. 114760, 2023.
[22] Y.P. Zhang, M.X. Xie, X.Y. Ji, L. Xu, and X.-W. Zhang, “Active anti-rolling for ships by tank swing and robust controller design,” China Ocean Engineering, vol. 39, no. 4, pp. 635–647, 2025.
[23] International Towing Tank Conference, Estimation of Roll Damping, ITTC Recommended Procedures and Guidelines No. 7.5-02-07-04.5, 2021.
[24] V. M. Hung, T. Q. Trung, and V. Q. Thang, “Adaptive fuzzy backstepping control for a dynamic positioning system of ships,” The University of Danang - Journal of Science and Technology, no. 3(112), pp. 44–49, 2017.
[25] J. Bell and W. P. Walker, “Activated and passive controlled fluid tank system for ship stabilization,” Transactions of the Society of Naval Architects and Marine Engineers, vol. 74, pp. 150–193, 1966.
[26] J. Vasta, A. J. Giddings, A. Taplin, and J. J. Stilwell, “Roll stabilization by means of passive tanks,” Transactions of the Society of Naval Architects and Marine Engineers, vol. 69, pp. 411–460, 1961.
[27] C. Stigter, “The performance of U-tanks as a passive anti-rolling device,” International Shipbuilding Progress, vol. 13, no. 144, pp. 249–275, 1966.
[28] A. F. A. Gawad, S. A. Ragab, A. H. Nayfeh, and D. T. Mook, “Roll stabilization by anti-roll passive tanks,” Ocean Engineering, vol. 28, no. 5, pp. 457–469, 2001.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Sep 30, 2026
Download
Cách trích dẫn
Son, L. T., N. C. Nguyen, và V. V. Toan. “Study on the Application of U-Shape Anti-Roll Tank for a Water Hyacinth Processing Machine”. Tạp Chí Khoa học Và Công nghệ Đại học Đà Nẵng, vol 24, số p.h 9, Tháng Chín 2026, tr 82-89, doi:10.31130/ud-jst.2026.24(9).172.
