Design of a Press for RDF Production from Household Waste
Abstract: 919
| 
PDF: 288 
##plugins.themes.academic_pro.article.main##
Author
Keywords:
RDF
solid wast energy recovery
solid waste treatment
environment pollution
press
Abstract
Energy recovery from solid waste through RDF production is a technological measure for thorough treatment of solid waste, minimizing waste that needs to be buried and limiting pollutant gases emissions. RDF quality depends on the fuel compositions and the manufacture conditions. Thus, the optimal parameters are needed for RDF production from given wastes. Hydraulic type press with 80mm-diameter cylinder, 140-bar oil pressure, compression section with connical angle less than 45 degrees are suitable for RDF pressing test conditions of wastes from Danang City. The outside surface of the mold is heated by a controlable heating source. The maximum temperature is found in the outside surface of the RDF as leaving the mold. The surface structure of RDF is affected by this temperature.
References
-
[1] Rakopoulos C, Michos N. “Development and validation of a multi-zone combustion model for performance and nitric oxide formation in syngas fueled spark ignition engine”. Energy Conversion and Management. 2008; (49):2924-14.
[2] Hagos F, Aziz A, Sulaiman S. “Trends of syngas as a fuel in internal combustion engines”. Advances in Mechanical Engineering. 2014; 1-10. Article id: 401587.
[3] Keith W. Have wood will travel complete plans for the Keith gasifier. 1st edn. Wayne Keith; 2013.
[4] Whitty K, Zhang H, Eddings E. “Emissions from syngas combustion”. Combustion Science and Technology. 2008; (180): 1117-19.
[5] Bui Van Ga, “Nghiên cứu kỹ thuật tạo hỗn hợp phân lớp cho động cơ dùng nhiên liệu khí dầu mỏ hóa lỏng LPG”. International Conference on Automotive Technology ICAT’99, pp. 101-107 Hà Nội, October 21-24, 1999.
[6] Bui Van Ga, Tran Van Nam, Tran T. H. Tung, Ho Tan Quyen, “Một số kết quả thực nghiệm trên xe máy sử dụng nhiên liệu khí dầu mỏ hóa lỏng LPG”. Tạp chí Giao thông Vận tải số 5, pp. 35-37, 2000.
[7] Bui Van Ga, Bui Thi Minh Tu, Truong Le Bich Tram, Bui Van Hung, “Technique of Biogas-HHO Gas Supply for SI Engine”. International Journal of Engineering Research & Technology (IJERT), Vol. 8 Issue 05, May-2019, pp. 669-674.
[8] Sokhansanj S., Mani S., Bi X., Zaini P., Tabil L., Binderless pel- letization of biomass, Presented at the ASAE Annual Inter- national Meeting, July 17–20, 2005, Tampa, Florida. ASAE Paper No. 056061. ASAE, 2950 Niles Road, St. Joseph, MI 49085-9659 USA.
[9] Yaman S., Şahan M., Haykiri-açma H., Şeşen K., Küçükbayrak S., “Production of fuel briquettes from olive refuse and paper mill waste”, Fuel Processing Technology, 68 (2000) 23–31.
[10] http://gizenergy.org.vn/media/app/media/bai%20trinh%20bay/1-_Amrehn_Module_1-VIE.pdf
Read more
##plugins.themes.academic_pro.article.sidebar##
Published
Feb 28, 2021
Download
How to Cite
Bui Van Ga, Vo Anh Vu, Huynh Van Thanh, Nguyen Xuan Thinh, Ngo Thanh Tin, Huynh Quoc Bao. “Design of a Press for RDF Production from Household Waste”. The University of Danang - Journal of Science and Technology, vol. 19, no. 2, Feb. 2021, pp. 13-17, https://jst-ud.vn/jst-ud/article/view/3655.
