A study of improving properties of aligned multi-walled carbon nanotube/epoxy composites
Tóm tắt: 18
| 
PDF: 13 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
aligned carbon nanotubes
prepregs
nano composites
mechanical stretching
mechanical properties
Tóm tắt
Composites made of an epoxy resin film and differently stacked aligned multi-walled carbon nano tube (MWCNT) sheets have been developed using hot-melt prepreg processing. The horizontally aligned 20-ply MWCNT sheets were created from vertically aligned MWCNT arrays using solid-state drawing and winding techniques. However, wavy and poor-packed MWCNTs in the sheets have restricted their load-transfer efficiency in the composites. Therefore, mechanical stretching was used to straight the wavy MWCNTs and to increase the dense packing of MWCNTs in the sheets. In this article, improving the composite properties through mechanical stretching of the MWCNT sheets was studied. Mechanical stretching of the MWCNT sheets considerably improved the mechanical properties of the composites. The improvement of the composite properties is derived from the straightening of wavy MWCNTs and the increase of MWCNT dense packing is caused by mechanical stretching.The decrease of the wavy MWCNTs is more efficient than the enhancement of MWCNT dense packing.
Tài liệu tham khảo
-
[1] Iijima S, Helical microtubules of graphitic carbon, Nature, 354, NPG, 1991, 56–58.
[2] Ruoff RS and Lorents DC, Mechanical and thermal properties of carbon nanotubes, Carbon, 33(7), Elsevier, 1995, 925–930.
[3] Ebbesen TW, Lezec HJ, Hiura H, Bennett JW, Ghaemi HF, and ThioT, Electrical conductivity of individual carbon nanotubes, Nature, 382, NPG, 1996, 54–56.
[4] Thostenson ET, Ren Z, and Chou TW, Advances in the science and technology of carbon nanotubes and their composites: a review, Composites Scienceand Technology, 61(13), Elsevier, 2001, 1899–1912.
[5] Inoue Y, Kakihata K, Hirono Y, Horie T, Ishida A, and Mimura H, One-step grown aligned bulk carbon nanotubes by chloride mediated chemical vapor deposition, Applied Physics Letters, 92(21), AIP, 2008,213113.
[6] Inoue Y, Suzuki Y, Minami Y, Muramatsu J, Shimamura Y, Suzuki K, and et al., Anisotropic carbon nanotube papers fabricated from multiwalled carbon nanotube webs, Carbon, 49(7), Elsevier, 2011, 2437–2443.
[7] Ogasawara T, Moon SY, Inoue Y, and Shimamura Y, Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg method, Composites Science Technology, 71(16), Elsevier, 2011, 1826–1833.
[8] Wang X, Bradford PD, Liu W, Zhao H, Inoue Y, Maria JP, and et al., Mechanical and electrical property improvement in CNT/Nylon composites through drawing and stretching, Composites Science and Technology, 71(14), Elsevier, 2011, 1677–1683.
[9] Nam TH, Goto K, Oshima K, Premalal EVA, Shimamura Y, Inoue Y, and et al., Effects of stretching on mechanical properties of aligned multi-walled carbon nanotube/ epoxy composites, Composites Part A, 64, Elsevier, 2014, 194–202.
[10] Nam TH, Goto K, Yamaguchi Y, Premalal EVA, Shimamura Y, Inoue Y, and et al., Effects of CNT diameter on mechanical properties of aligned CNT sheets and composites, Composites Part A, 76, Elsevier, 2015, 289-298.
[11] Liu W, Zhang X, Xu G, Bradford PD, Wang X, Zhao H, and et al., Producing superior composites by winding carbon nanotubes onto a mandrel under a poly (vinyl alcohol) spray, Carbon, 49(14), Elsevier, 2011, 4786-4791.
[12] Ji J, Sui G, Yu Y, Liu Y, Lin Y, Du Z,et al.,Significant improvement of mechanical properties observed in highly aligned carbon-nanotube-reinforced nanofibers, The Journal of Physical Chemistry C, 113(12), ACS, 2009, 4779-4785.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Dec 31, 2015
Download
Cách trích dẫn
Tran Huu Nam; Vu Minh Hung; Vo Quoc Thang. “A Study of Improving Properties of Aligned Multi-Walled Carbon nanotube/Epoxy Composites”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 12, số p.h 97.1, Tháng Chạp 2015, tr 38-42, https://jst-ud.vn/jst-ud/article/view/3680.
