Study on the new solution of air plasma spray for improving the performance of amorphous coatings
Tóm tắt: 37
| 
PDF: 53 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Wear resistance
hard-facing
air plasma spray
self-flux powder
amorphous Fe-based powder
Tóm tắt
Thermal spray processes found wide applications in many industries, including the automotive industry due to their versatility and efficiency. There were a lot of publications about the hard-facing of these components using some thermal spray processes: electric arc wire, High Velocity Oxygen - Fuel (HVOF), detonation, and plasma. The decision of the engineer depends on the context based on the specific character of the component, the operation condition, and the availability of the equipment. The typical generation plasma gas is the inert gas, namely the argon, helium, or their mixture. Recent publications have shown the result of deposition using amorphous powder, cermet, and self-flux materials. However, there is a lack of investigation on the air plasma spray using Fe-based powders. The contribution of this work is the new combining solution, including the innovation of a plasma torch, to spray Fe-based powders in the ordinary air for hard-facing provided wear resistance.
Tài liệu tham khảo
-
[1] Armelle Vardelle et al. “The 2016 Thermal Spray Roadmap (review)”, Journal of Thermal Spray Technology, 25(8),2016, pp.1376-1433, DOI:10.1007/s11666-016-0473-x.
[2] B Schinder, A Garling, U Mayer, R Grabs & T Lampke, “Advanced corrosion resistant cylinder – bore coatings”, IOP Conference Series: Materials Science and Engineering, 1147, 2021, 012034, doi:10.1088/1757-899X/1147/1/012034.
[3] Sonia, R.S. Walia, N.M. Suri., Sumit Chaudhary and Ankit Tyagi, “Potential application of thermal spray coatings for I.C. engine tribology: A Review”, Journal of Physics: Conference Series, 1950 (2021), 012041, doi:10.1088/1742-6596/1950/1/012041.
[4] Shrikant Joshi & Per Nylen, “Advanced Coatings by Thermal Spray Processes”, Technologies, 7(79), 2019, doi:10.3390/technologies7040079.
[5] Esmaeil Sadeghi, Nicolae Markocsan & Shrikant Joshi,” Advances in Corrosion-Resistant Thermal Spray Coatings for Renewable Energy Power Plants. Part I: Effect of Composition and Microstructure”, J Therm Spray Tech, 28, 2019: 1749-1788, https://doi.org/10.1007/s11666-019-00938-1.
[6] Kunal Mondal, Luis Nunez III, Calvin M. Downey & Isabella J.van Rooyen,”Thermal Barrier Coatings Overview: Design, Manufacturing and Applications in High-Temperature Industry”, Eng. Chem. Res, 60, 2021, 176061-6067, https://doi.org/10.1021/asc.iecr.1c00788
[7] Irina Hussainova & Maksim Antonov, “Assessment of cermet performance in erosive media”, International Journal of Matrials and Product Technology, 28(3-4), 2007, pp. 361-376, DOI: 10.1504/IJMPT.2007.013085.
[8] G. De la Obra.,M.A. Aviles.,Y.Torres & Ernesto Chicardi,” A new family of cermets:Chemically complex but microstructurally simply”, International Journal of Refractory Metals and Hard Metarials, 63:17-25, 2016, DOI:10.1016/j.ijrmhm.2016.04.011
[9] Subin Antony Jose, Merbin John & Pradeep L. Menezes, “Cermet System: Synthesis, Properties and Applications”, Ceramics, 5,2022210-236, https://doi.org/10.3390/ceramics5020018.
[10] Carlos G.P. Moraes et al. “Investigating the Correlation between the Microstructure and Electrical Properties of FeSbO4 Ceramics”, Materials, 15(19), 2022, 6555, http://doi.org/10.3390/ma15196555.
[11] Anna Trelka et al. “The Effect of the Substrate on the Microstructure and Tribological Properties of Cold Sprayed (Cr3C2-25(Ni20Cr))-(Ni-Graphite) Cermet Coatings”, Materials, 15(3), 2022, 994, http://doi.org/10.3390/ma15040994.
[12] Mart Kolnes et al. “Performance of Ceramic- Metal Composites as Potential Tool Materials for Friction Stir Welding of Aluminium, Coper and Stainless Steel”, Materials, 13(8), 2022, http://doi.org/10.3390/ma13081994
[13] Lida Heydari et al. “Ti (C,N) and WC-Based Cermets: A Review of Synthesis,Properties and Applications in Additive Manufacturing”, Materials, 14(22), 2021, 6786, http://doi.org/10.3390/ma14226786
[14] Gang Wang, Zhongjia Huang, Ping Xiao & Xiebing Zhu, “Spraying of Fe-based amorphous coatings with high corrosion resistance by HVAF”, Journal of Manufacturing Processes, 22, 2016, 34-38, http://dx.doi.org/10.1016/j.jmapro.2016.01.009
[15] Shitao Zhang, Wenge Li, Yihuai Hu, Tao Jiang, Leyang Guo, Yangyang Zhang & Yuantao Zhao, “Effect of spraying power on the microstructure and wear behavior of the plasma- sprayed FeCoCrNiMo2 coatings”, AIP Advances, 11(11), 115110 (2021); doi:10.1063/5.0074776.
[16] Viktor Kuzmin, Igor Gulaev, Dmitriy Sergachev, Sergey Vashchenko, Anatoliy Lusakov & Boris Palagushkin, “Supersonic air-plasma spraying of carbide ceramic coatings”, Materialstoday: Proceedings, 38(4), 2021, 1974-1979, https://doi.org/10.1016/j.matpr.2020.09.150
[17] Viktor Kuzmin, Igor Gulyaev, Dmitriy Sergachev, Sergey Vaschenko, Elena Kornienko & Alexander Tokarev, “Equipment and technologies of air -plasma spraying of functional coatings”, MATEC Web of conference, 129, 2017, 01052, DOI: 10.1051/ matecconf/201712901052
[18] Zhang, F.Sun, L.Zhu, M.P Planche, H.Liao, C.Dong and C.Coddet, “ Measurement of Specific Enthalpy Under Very Low Pressure Plasma Spray Condition”, Journal of Thermal Spray Technology, 21(3-4), 2012, DOI:10.1007/s11666-012-9738-1.
[19] Duong Vu & Quy Le Thu, “The Correlation Between the Main Parameters in the Air- Plasma Spraying of Fe-Based Amorphous Coatings”, AMAS 2021, Lecture Note in Mechanical Engineering, Springer Nature 2022, 499-506, DOI: 10.1007/978-3-030-99666-6_72.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Dec 31, 2022
Download
Cách trích dẫn
Duong Vu. “Study on the New Solution of Air Plasma Spray for Improving the Performance of Amorphous Coatings”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 20, số p.h 12.1, Tháng Chạp 2022, tr 36-40, doi:10.31130/ud-jst.2022.525E.
