Analyze the shaping characteristics of micro-cylindrical-post in manufacturing process of a superhydrophobicity film
Tóm tắt: 69
| 
PDF: 79 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Superhydrophobicity material
MEMS
Shape optimization
Micropost structure
Multiscale manufacturing system
Tóm tắt
Superhydrophobic films (SHF) have recently increased in routine due to their non-wettable capacity. Superhydrophobicity can be occurred by making a micro-structural-post on materials with the surface having a low energy level. Thus, the shaping characteristics of the micro-structural-post should be considered. This paper analyzes the influence and evaluates the characteristics of micro-cylindrical-post having different parameters to the superhydrophobicity of PUA film. Firstly, the structure and characteristics of Polyurethane Acrylate (PUA) material are introduced. Moreover, the manufacturing process to create the micro-cylindrical-post on PUA film is illustrated. Finally, the influence of the different shaping parameters of micro-cylindrical-post on the superhydrophobicity of PUA film is evaluated and analyzed.
Tài liệu tham khảo
-
[1] Kumar and D. Nanda, “Chapter 3 - Methods and fabrication techniques of superhydrophobic surfaces”, in Superhydrophobic Polymer Coatings – Fundamentals, Design, Fabrication and Applications, Elsevier, 2019, pp. 43-75. https://doi.org/10.1016/B978-0-12-816671-0.00004-7.
[2] Jeevahan, M. Chandrasekaran, G. Britto Joseph, R.B. Durairaj, and G. Mageshwaran, “Superhydrophobic surfaces: a review on fundamentals, applications, and challenges”. J. Coat. Technol. Res., vol. 15, pp. 231–250, 2018, https://doi.org/10.1007/s11998-017-0011-x.
[3] Ragesh, V.A. Ganesh, S.V. Nair, and A.S. Nair, “A review on ‘self-cleaning and multifunctional materials”. J. Mater. Chem. A, vol. 2, pp. 14773-14797, 2014.
[4] S. Latthe et al., “Self – cleaning superhydrophobic coatings: Potential industrial applications”, Progress in Organic Coatings, vol. 128, pp. 52-58, 2019.
[5] An et al., “Directional droplet-actuation and fluid-resistance reduction performance on the bio-inspired shark-fin-like superhydrophobic surface”. J. Tai. Inst. Chem. Eng., vol. 97, pp. 389-396, 2019. https://doi.org/10.1016/j.jtice.2019.01.015
[6] Adak, R. Bhattacharyya, and H.C. Barshilia, “A state-of-the-art review on the multifunctional self-cleaning nanostructured coatings for PV panels, CSP mirrors and related solar devices”, Renewable and Sustainable Energy Reviews, vol. 159, 112145, 2022. https://doi.org/10.1016/j.rser.2022.112145.
[7] D. Pham, Q. B. Tao, and C.N. Pham, “Optimizing the Superhydrophobicity of the Composite PDMS/PUA Film Produced by a R2R System”. Ind. Eng. Chem. Res., vol. 62, no. 6, pp. 2469–2477, 2023. https://doi.org/10.1021/acs.iecr.2c04491
[8] Qiu, J. Zhang, D. Wu, Q. Zhang, and D. Yang, “Preparation, Characterisation and Mechanical Properties of Environmentally Friendly Waterborne Polyurethane and Polyurethane-Acrylate”. Polymers & Polymer Composites, vol. 17, no. 8, pp. 521-527, 2009.
[9] Wang, Z. Zhou, M. Chen, J. Wang, and Y. Yu, “UV-Curable Polyurethane Acrylate Pressure-Sensitive Adhesives with High Optical Clarity for Full Lamination of TFT-LCD”, ACS Appl. Polym. Mater., vol. 5, no. 3, pp. 2051−2061, 2023.
[10] Jiang, Y. Zang, Q. Wang, and T. Wang, "Superhydrophobic polyurethane and silica nanoparticles coating with high transparency and fluorescence)", Journal of Applied Polymer Science, vol. 129, no. 5, pp. 262-272, 2013.
[11] K. Nguyen, K. Chau Duc, and A.D. Pham, “Characterization of an FDM-3D Printed Moldcore in a Thermoforming Process Using Taguchi in Conjunction with Lumped-Capacitance Method”. Arab. J. Sci. Eng. Vol. 48, pp. 11989-12000, 2023. https://doi.org/10.1007/s13369-023-07646-7
[12] K. Nguyen and A.D. Pham, “An Investigation on Pressure-Specific Volume–Temperature Behaviors of a Thermoplastic Under Industrial Conditions Using a Hot Runner Manifold”, Int. J. Precis. Eng. Manuf., Vol. 24, No. 10, pp. 1845-1853, 2023. https://doi.org/10.1007/s12541-023-00847-y
[13] K. Nguyen, M.Q. Chau, T-C. Do, and A.D. Pham, “Characterization of geometrical parameters of plastic bottle shredder blade utilizing a two-step optimization method”, Archive of Mechanical Engineering, vol. 68, no. 3, pp.253-269, 2021.
[14] -J. Choi, H. N. Kim, W. G. Bae, and K.-H. Suh, “Modulus- and surface energy-tunable ultraviolet-curable polyurethane acrylate: properties and applications”, J. Mater. Chem., vol. 21, pp. 14325- 14335, 2011.
[15] Yuan, J. Wang, M. Cui, and Y. Peng. "Aqueous PUA emulsion prepared by dispersing polyurethane prepolymer in polyacrylate emulsion”, J. Appl. Poplm. Sci., vol. 133, no. 11, 2015. DOI: 10.1002/APP.43203
[16] Wang, S. Xu, X. Xing, and N. Wang, “Progress in fabrication and applications of micro/nanostructured superhydrophobic surfaces”, Surface Innovations, vol. 10, no. 2, pp. 89-110, 2022. https://doi.org/10.1680/jsuin.21.00031.
[17] Sondergaard, M. Hosel, D. Angmo, T. T.Larsen-Olsen, and F. C. Krebs, “Roll-to-roll fabrication of polymer solar cells”, Materials today, vol. 15, no. 1-2, pp. 36-49, 2012. (Open Acess) https://doi.org/10.1016/S1369-7021(12)70019-6
[18] Kronlund, M. Lindén, and J-H. Smått, “A polydimethylsiloxane coating to minimize weathering effects on granite”, Construction and Building Materials, vol. 124, pp. 1051-1058, 2016.
[19] L.M. Al-Harbi, M.S.A. Darwish, and M.M. Khowdiary, and I. Stibor, “Controlled Preparation of Thermally Stable Fe-Poly(dimethylsiloxane) Composite by Magnetic Induction Heating”, Polymers, vol. 10, no. 5, pp. 507, 2018. doi: 10.3390/polym10050507.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Dec 31, 2023
Download
Cách trích dẫn
Pham, A.-D. “Analyze the Shaping Characteristics of Micro-Cylindrical-Post in Manufacturing Process of a Superhydrophobicity Film”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 21, số p.h 12.1, Tháng Chạp 2023, tr 6-9, doi:10.31130/ud-jst.2023.409E.
