Effect of biodiesel blend ratio derived from rubber seed oil on the fuel consumption when using in the diesel engine without structural modification by simulation and experiment
Tóm tắt: 36
| 
PDF: 48 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Biodiesel
Diesel engine
Fuel consumption
Specific energy consumption
Rubber seed oil
Tóm tắt
In this study, The model Mazda WL diesel engine,
4-cylinder, 4 straight-line cylinder with biodiesel blends ratio of 0%, 15%, 20%, 25%, 30% derived from rubber seed oil and DO has been simulated on ANSYS FLUENT software to analyze fuel consumption characteristics. Experimental engine has been using fuel with diesel (DO) and biodiesel blends (B15, B20, B25, B30) derived from rubber seed oil for a Mazda WL diesel engine installed on Mazda 2500 and Ford Ranger cars. The simulation results show that the average increase in fuel consumption rates for all modes for B15, B20, B25 and B30 compared to DO fuel are 0.71%, 1.69%, 2.77% and 3,83% respectively. Experimental results show that the average increase in fuel consumption rates for all modes for B15, B20, B25 and B30 compared to DO fuel are 0.58%, 1.39%, 2.19% and 3,19% respectively.
Tài liệu tham khảo
-
[1] Hammond, S. Kallu, and M. McManus, “Development of biofuels for the UK automotive market”, Applied Energy, vol. 85, no. 6, Jun. 2008, pp. 506-515.
[2] Lapuerta, O. Armas, R. Ballesteros, and J. Fernˇndez, “Diesel emissions from biofuels derived from Spanish potential vegetable oils”, Fuel, vol. 84, no. 6, Apr. 2005, pp. 773-780.
[3] Durbin, J. Collins, J. Norbeck, and M. Smith, “Effects of Biodiesel, Biodiesel Blends, and a Synthetic Diesel on Emissions from Light Heavy-Duty Diesel Vehicles”, Environmental Science & Technology, vol. 34, no. 3, Feb. 2000, pp. 349-355.
[4] Daniel Puppan, “Environmeental Evaluation of Biofules”, 16-Jun-2008. Online]. Available: http://www.pp.bme.hu/so/2002_1/pdf/so2002_1_08.pdf. [Accessed: 16-Jun-2008].
[5] Ramadhas, C. Muraleedharan, and S. Jayaraj, “Performance and emission evaluation of a diesel engine fueled with methyl esters of rubber seed oil”, Renewable Energy, vol. 30, no. 12, Oct. 2005, pp. 1789-1800.
[6] P. Dorado, E. Ballesteros, J. M. Arnal, J. Gˇmez, and F. J. Lˇpez, “Exhaust emissions from a Diesel engine fueled with transesterified waste olive oil[small star, filled]”, Fuel, vol. 82, no. 11, Jul. 2003, pp. 1311-1315.
[7] Utlu and M. S. Koˇak, “The effect of biodiesel fuel obtained from waste frying oil on direct injection diesel engine performance and exhaust emissions”, Renewable Energy, vol. 33, no. 8, Aug. 2008, pp. 1936-1941.
[8] Lapuerta, O. Armas, R. Ballesteros, and J. Fernández, “Diesel emissions from biofuels derived from Spanish potential vegetable oils”, Fuel, vol. 84, no. 6, Apr. 2005, pp. 773-780.
[9] Lapuerta, O. Armas, and J. Rodríguez-Fernández, “Effect of biodiesel fuels on diesel engine emissions”, Progress in Energy and Combustion Science, vol. 34, no.2, Apr. 2008, pp. 198-223.
[10] AltIparmak, A. Keskin, A. Koca, and M. Gˇrˇ, “Alternative fuel properties of tall oil fatty acid methyl ester-diesel fuel blends”, Bioresource Technology, vol. 98, no. 2, Jan. 2007, pp. 241-246.
[11] Monyem and J. H. Van Gerpen, “The effect of biodiesel oxidation on engine performance and emissions”, Biomass and Bioenergy, vol. 20, no. 4, Apr. 2001, pp. 317-325.
[12] Gao et al., “Experimental study of the spray characteristics of biodiesel based on inedible oil”, Biotechnology Advances, vol. 27, no. 5, 2009, pp. 616-624.
[13] Tesfa, R. Mishra, F. Gu, and N. Powles, “Prediction models for density and viscosity of biodiesel and their effects on fuel supply system in CI engines”, Renewable Energy, vol. 35, no. 12, Dec. 2010, pp. 2752-2760.
[14] Gumus, “A comprehensive experimental investigation of combustion and heat release characteristics of a biodiesel (hazelnut kernel oil methyl ester) fueled direct injection compression ignition engine”, Fuel, Vol. 89, Issue 10, October 2010, 2802-2814, DOI:10.1016/J.FUEL.2010.01.035.
[15] Duong Viet Dung, Tran Van Nam, Nguyen Manh Cuong, “Comparision of the exhaust components of biodiesel from fish fat and diesel in internal combustion engine”, 2nd International Conference on Green Technology and Sustainable Development, Octorber 30th - 31st, 2014.
[16] Kim, H., and N.Sung. "Combustion and Emission modelling for a Direct Injection Diesel Engine". SAE paper No.2004-01-0104, 2004.
[17] Stiesch, “Modeling Engine Spray and Combustion Processes”, Springer-Verlag Berlin Heidelberg. 2003.
[18] Kärrholm, F.P., "Numerical Modelling of Diesel Spray Injection, turbulence Interaction and Combustion". Thesis for Doctor of Philosophy, 2008.
[19] Han, Z.; Reitz, R.D., "Turbulence Modeling of Internal Combustion Engines Using RNG k-e Models", Combust. Sci. and Tech. 106, 4-6, p. 267, 1995.
[20] J. Abraham, F. V. Bracco, and R. D. Reitz, Comparison of Computed and Measured Premixed Charged Engine Combustion, Combustion and Flame, Vol. 60, 1985, pp. 309-322.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Dec 31, 2022
Download
Cách trích dẫn
Nguyen Manh Cuong, Huynh Phuoc Son, và Dang Thi Loan. “Effect of Biodiesel Blend Ratio Derived from Rubber Seed Oil on the Fuel Consumption When Using in the Diesel Engine Without Structural Modification by Simulation and Experiment”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 20, số p.h 12.1, Tháng Chạp 2022, tr 6-10, doi:10.31130/ud-jst.2022.312E.
