Analysis of single pile ultimate lateral resistance in clayey soil under horizontal ground movement using RPFEM
Tóm tắt: 242
| 
PDF: 115 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Ultimate lateral resistance
Single pile
Horizontal ground movement
Rigid plastic finite element method (RPFEM)
Tóm tắt
This study investigates the ultimate lateral resistance of a single pile subjected to horizontal ground movement in clayey soils, employing a self-developed Rigid Plastic Finite Element Method (RPFEM). The analysis effectively predicts the ultimate lateral resistance of a single pile by modeling the interaction between the pile and surrounding soil, with a focus on understanding the failure zones and overall resistance behavior. A key finding of this research is the critical influence of installation-induced strength reduction in the surrounding soil, which significantly impacts the ultimate lateral resistance of the pile. The results demonstrate a high sensitivity of lateral resistance to changes in soil strength caused by the pile installation process. These findings underscore the importance of incorporating such installation effects into geotechnical design assessments, as they are essential for improving the accuracy of pile behavior predictions, particularly in sensitive and clayey soil environments where soil strength changes are pronounced.
Tài liệu tham khảo
-
[1] B. B. Broms, "Lateral Resistance of Piles in Cohesive Soils", Journal of the Soil Mechanics and Foundations Division, ASCE, vol. 90, no. 2, pp. 27-63, 1964.
[2] M. F. Randolph, and G. T. Houlsby, "The limiting pressure on a circular pile loaded laterally in cohesive soil", Géotechnique, vol. 34, no. 4, pp. 613-623, 1984.
[3] L. T. Chen and H. G. Poulos, "The behavior of piles subjected to lateral soil movements", Research Report No. 731, University of Sydney, Australia, 1996.
[4] L. T. Chen and H. G. Poulos, "Piles Subjected to Lateral Soil Movements", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, vol. 123, no. 9, pp. 802-811, 1997.
[5] L. T. Chen, H. G. Poulos, and T. S. Hull, "Model test on pile groups subjected to lateral soil movement", Soils and Foundations, vol. 37, no. 1, pp. 1-12, 1997.
[6] M. F. Randolph, J. P. Carter, and C. P. Wroth, "Driven piles in clay - The effects of installation and subsequent consolidation", Géotechnique, vol. 29, no. 4, pp. 361-393, 1979.
[7] J. K. Mitchell and R. J. Gardner, "In-situ measurement of volume change characteristics of clays", Journal of the Geotechnical Engineering Division, vol. 101, no. 4, pp. 403-424, 1975.
[8] D. A. Brown, et al, "Guidelines for use of strain-based methods for the design of driven piles", Journal of Geotechnical and Geoenvironmental Engineering, vol. 146 (3), pp. 04020006, 2020.
[9] T. Tamura, S. Kobayashi, and T. Sumi, "Rigid Plastic Finite Element Method for Frictional Materials", Soils and Foundations, vol. 27, no. 3, pp. 1-12, 1987.
[10] T. Tamura, S. Kobayashi, and T. Sumi, "Rigid Plastic Finite Element Method in Geotechnical Engineering Computational", Current Japanese Material Research, pp. 15-23, 1990.
[11] P. N. Quang, S. Ohtsuka, K. Isobe, and Y. Fukumoto, "Group effect on ultimate lateral resistance of piles against uniform ground movement", Soils and Foundations, vol. 59, no. 1, pp. 27-40, 2019.
[12] P. N. Quang, S. Ohtsuka, K. Isobe, Y. Fukumoto, and T. Hoshina, "Ultimate bearing capacity of rigid footing under eccentric vertical load", Soils and Foundations, vol. 59, no. 6, pp. 1980-1991, 2019.
[13] P. N. Quang, S. Ohtsuka, K. Isobe, and Y. Fukumoto, "Limit load space of rigid footing under eccentrically inclined load", Soils and Foundations, vol. 60, no. 4, pp. 811-824, 2020.
[14] P. N. Quang, "Estimation of Ultimate Lateral Resistance of Pile Group, and Ultimate Bearing Capacity of Rigid Footing under Complex Load by using Rigid Plastic Finite Element Method", 2020. (Doctoral dissertation, Nagaoka University of Technology).
[15] P. N. Quang and S. Ohtsuka, "Ultimate bearing capacity of rigid footing on two-layered soils of sand–clay", International Journal of Geomechanics, vol. 21, no. 7, pp. 04021115, 2021.
[16] P. N. Quang, S. Ohtsuka, K. Isobe, and Y. Fukui, "Consideration on Limit Load Space of Footing on Various Soils Under Eccentric Vertical Load", in Challenges and Innovations in Geomechanics: Proceedings of the 16th International Conference of IACMAG-Volume 2, vol. 16, pp. 75-84, 2021. Springer International Publishing.
[17] P. N. Quang, S. Ohtsuka, K. Isobe, and Y. Fukumoto, "Limit load space of rigid strip footing on cohesive-frictional soil subjected to eccentrically inclined loads", Computers and Geotechnics, vol. 151, p. 104956, 2022.
[18] N. Q. Pham and S. Ohtsuka, "Numerical investigation on bearing capacity of rigid footing on sandy soils under eccentrically inclined load", in Proceedings of the 2nd Vietnam Symposium on Advances in Offshore Engineering: Sustainable Energy and Marine Planning, pp. 333-341, 2022. Springer Singapore.
[19] P. N. Quang, S. Ohtsuka, K. Isobe, N. V. Pham, and P. H. Hoang, "Limit load space of rigid strip footing on sand slope subjected to combined eccentric and inclined loading", Computers and Geotechnics, vol. 162, p. 105652, 2023.
[20] P. N. Vinh, P. N. Quang, and H. Thang, "Effect of foundation surface roughness on ultimate bearing capacity of an eccentrically loaded foundation", The University of Danang – Journal of Science and Technology, vol. 21, no. 12.1, pp. 28-33, 2023.
[21] P. N. Quang and P. N. Vinh, "Effect of footing roughness on ultimate bearing capacity of rigid strip footing on sandy soil slope", The University of Danang – Journal of Science and Technology, vol. 21, no. 12.1, pp. 22–27, 2023.
[22] P. N. Quang and P. N. Vinh, "Estimation of ultimate bearing capacity of strip footings on cohesive-frictional soils using non-linear shear strength model", The University of Danang – Journal of Science and Technology, vol. 22, no. 6.A, pp. 29-34, 2024.
[23] P. N. Quang, S. Ohtsuka, K. Isobe, P. N. Vinh, and H. P. Hoa, "Undrained failure envelope (V–H–M) of rigid strip footings on clayey soil slopes under eccentric and inclined loads", Arabian Journal for Science and Engineering, vol. 50, pp. 1–28, 2025.
[24] P. N. Quang and P. N. Vinh, "Safety factor analysis of natural slopes using Rigid Plastic Finite Element Method (RPFEM)", The University of Danang – Journal of Science and Technology, vol. 22, no. 12, pp. 49-54, 2024.
[25] K. Georgiadis, S. W. Sloan, and A. V. Lyamin, "Ultimate lateral pressure of two side-by-side piles in clay", Géotechnique, vol. 63, no. 9, pp. 733-745, 2013.
[26] K. Georgiadis, S. W. Sloan, and A. V. Lyamin, "Effect of loading direction on the ultimate lateral soil pressure of two piles in clay", Géotechnique, vol. 63, no. 13, pp. 1170-1175, 2013.
[27] K. Georgiadis, S. W. Sloan, and A. V. Lyamin, "Undrained limiting lateral soil pressure on a row of piles", Computer and Geotechnics, vol. 54, pp. 175-184, 2013.
[28] Z. Zhao, D. Li, F. Zhang, and Y. Qiu, "Ultimate lateral bearing capacity of tetrapod jacket foundation in clay", Computers and Geotechnics, vol. 84, pp. 164-173, 2017.
[29] S. Koumura, Y. Shiratori, S. Ohtsuka, and T. Hoshina, "Estimation of ultimate lateral resistance of pile in clayey ground", Proc. 14th Int. Conf. IACMAG 2014, Taylor & Francis, pp. 947-950, 2015.
Xem thêm
##plugins.themes.academic_pro.article.sidebar##
Đã Xuất bản
Jun 30, 2025
Download
Cách trích dẫn
Quang, P. N., P. N. Vinh, và H. P. Hoa. “Analysis of Single Pile Ultimate Lateral Resistance in Clayey Soil under Horizontal Ground Movement Using RPFEM”. Tạp Chí Khoa học Và Công nghệ - Đại học Đà Nẵng, vol 23, số p.h 6A, Tháng Sáu 2025, tr 23-28, doi:10.31130/ud-jst.2025.23(6A).036E.
