Analytical study of flexural behavior of various components utilizing the formwork panels made of high-strength concrete
Tóm tắt: 53
| 
PDF: 18 
##plugins.themes.academic_pro.article.main##
Author
Từ khóa:
Tóm tắt
Using a new generation formwork system made from high-strength concrete is an advanced construction approach, not only reducing construction time but also improving the surface quality and enhancing the load-bearing capacity of reinforced concrete (RC) structures. This study aims to investigate the flexural behavior of RC components when using the novel formwork system was investigated to clarify its effectiveness in enhancing the flexural performance. For this purpose, a series of simulations with different scenarios corresponding to flexural components, including columns, beams, walls, and floors, were conducted. The results show that high-strength concrete formwork combined with stainless steel or FRP-reinforced materials helps increase the flexural capacity of the resulting components. Ensuring the bond between the formwork layer and the in-situ concrete is essential to maintain the loading-bearing behavior for thin components such as floors and walls because it significantly affects the effective cross-section of the element.
Tài liệu tham khảo
-
[1] Li, X. Lin, D. W. Bao, and Y. M. Xie, "A review of formwork systems for modern concrete construction”, in Structures, vol. 38, no. 1, pp. 52-63, 2022.
[2] Song, M. Deng, S. Zhang, X. Hu, J. Cao, and X. Bu, "Flexural properties of reinforced concrete slabs using highly ductile concrete (HDC) permanent formwork system”, Journal of Building Engineering, vol. 80, p. 108111, 2023.
[3] Yin, X. Cong, C. Wang, and C. Wang, "Research on flexural performance of composited RC beams with different forms of TRC permanent formwork”, in Structures, vol. 29, pp. 1424-1434, 2021.
[4] V. Hung et al., " Application of UHPC formwork for castoin-situ reinforced concrete bridge deck slab", Journal of Science and Technology in Civil Engineering (JSTCE) – Hanoi University of Civil Engineering (HUCE), vol. 13, no. 2V, pp. 1-12 (in Vietnamese), 2019.
[5] V. Tam, L. H. An, and T. L. Anh, " Experimental investigation on permanent UHPC formwork based on the axial compression test on the concrete core of NSC-UHPC columns”, Journal of Construction, vol.9, pp. 74-77 (in Vietnamese), 2022
[6] Zhang, F. Xu, Y. Liu, and S. A. Sheikh, "Shear behaviour of composite beams with permanent UHPC formwork and high-strength steel rebar”, Construction and Building Materials, vol. 352, p. 128951, 2022.
[7] F. Yukiko Kojima, Kazunori Kono, Nguyen Minh Hai "Load-bearing performance experiment of beam members assuming columns with SUS reinforcing embedded formwork”, Proceedings of the Japan Concrete Institute, vol. 41, no. 2, pp. 1111-1116 (in Japanese), 2019.
[8] S. Shuichi Fujikura, Nguyen Minh Hai, "Analytical study on bending behavior of members assuming columns with SUS buried formwork”, Proceedings of the Japan Concrete Institute, vol. 42, no. 2, pp. 1015-1020 (in Japanese), 2020.
[9] U. Manual, "Abaqus user manual”, Abacus, 2020.
[10] Lim, "CoMat-Abaqus input file generator for concrete damaged plasticity model."
[11] -L. Shi, H.-W. Li, W.-D. Wang, and C. Hou, "A fiber model based on secondary development of abaqus for elastic–plastic analysis”, International Journal of Steel Structures, vol. 18, pp. 1560-1576, 2018.
[12] Ashour and C. Morley, "Three-dimensional nonlinear finite element modelling of reinforced concrete structures”, Finite Elements in Analysis and Design, vol. 15, no. 1, pp. 43-55, 1993.
[13] Qiao and Y. Chen, "Cohesive fracture simulation and failure modes of FRP–concrete bonded interfaces”, Theoretical and applied fracture mechanics, vol. 49, no. 2, pp. 213-225, 2008.
[14] M. Santos and E. N. Julio, "Correlation between concrete-to-concrete bond strength and the roughness of the substrate surface”, Construction and Building Materials, vol. 21, no. 8, pp. 1688-1695, 2007.
[15] N. Hassoun and A. Al-Manaseer, Structural concrete: theory and design. John wiley & sons, 2020.
##plugins.themes.academic_pro.article.sidebar##
